This might be useful if a basic mix only needed to be tweaked to make it appropriate for other musicians. Copy Mix settings - This copies the settings of the selected mix to another mix.Clicking on this button reveals a list of possible outputs and the mix can be routed to each output by clicking on the output. Mix destination - This is one of the methods to route the mix to a physical output.The controls that differ from the mixer channel are outlined below. The master channel is the channel of the very right-hand side of the mixer and behaves similarly to each mixer channel in the corresponding mix. Channel name - This is the name of the channel.Mute button - This Mutes the selected channel in the mix.Solo button - This Solos the selected channel in the mix.PFL button - This routes only the selected channel to the monitor outputs until it is pushed again.Level meter - From left to right: Gain applied by fader (dB) Maximum level (dBFS) Current level (dBFS).Channel Mono/stereo toggle switch - This will switch the channel between one stereo channel and two stereo channels.To remedy this, lower the gain and click on the red bar. If the signal has clipped it will display a red bar at the top of the meter. This can be a useful way to monitor the input signal.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |